RACE WINNING TELEMETRY
TLM-P2 Telemetry Device
The TLM-P2™ is a single modem variant of the 24-hour race-winning TLM-P1 device.
Product highlights:
- Unique TLM protocol provides data sequencing, de-duplication, optimisation and retransmission
- Intelligent packetisation of data for each type of logger reduces the impact of data loss
- High / Low bandwidth telemetry switching via CAN (supported loggers only)
- CAN control of device allows the logger to supress transmission of data when not required ensuring predicable data usage
- CAN integration additionally allows dynamic control of telemetry options such as transmission modes and data destination
- Ultracap ensures the device does not need to boot again if the car is briefly power cycled
The CAN interface provides a tight integration with vehicle systems enabling diagnostic information from the device to be logged and viewed in context whilst behaviour can be controlled by the vehicle control systems allowing for advanced data transmission strategies.
Ethernet connectivity allows higher data rates than traditional RS232 telemetry. Cloud connectivity provides remote diagnostics, configuration, and software updating.
| Input | 9-16v |
| Max Current | 0.5-1.2A mode and charge state dependent |
| Backup Power | 30 Seconds whilst transmitting |
| Temperature | -10°C – + 85°C (14°F – 185°F) |
| Modem Type | LTE Cat-12 with 3G fallback |
| Global | Global |
| 200Mb/s Down, 50Mb/s Up (Peak) | 200Mb/s Down, 50Mb/s Up (Peak) |
| 1x eSIM + 1x 2FF Locking Sim Slot | 1x eSIM + 1x 2FF Locking Sim Slot |
| Device | RS232 Support | Ethernet Support |
| Bosch | Max 115200 | Max 200kb/s |
| Cosworth | Max 115200 | Max 280kb/s |
| Magnetti Marelli | Max 57600 | Contact Us |
| McLaren Applied | Contact Us | Max 1Mb/s (under development) |
| MoTeC | Max 230400 | Not applicable |
| Other | Max 460800 | Contact Us |
